“Portable” series, rugged smaller frame top-entry mixers with investment cast aluminum bearing housings and several mounting configurations. Ideal for either open or closed tank applications, and are standard with two oversized bearings for high performance and a long service life. DUAL sealed drive bearings with radial load rating of more 7,000 LBF per bearing. Modular construction allows for easy service of drive components as well as longer drive component life cycle. NEMA connections allow for interchangeability of parts. Stainless steel mounting components and all fastening hardware standard.
Quick Shipping on standard models at Fusion-Express.com:
Custom styles are available...just contact us for details and quote!
Specs:
- Power: 1/3 - 5HP
- Direct Drive Speeds: 1,150 – 3,450RPM
- Standard @ 1,750 RPM
- Gear Drive Speeds: 175 – 850RPM
- Standard @ 350 RPM
- Shaft Diameters (typical): ¾”, 1”, 1.25”, & 1.5”
- Shaft Length: Up to 120" From Mounting Base
- Hollow Bore and Rigid Coupling Options for Shaft Connections
- Open Tank Mounts: Clamp, Cup Plate, Plate, and Angle Riser
- Closed Tank Mounts: ANSI flange and Tri-clamp Ferrule.
Sales Drawings:
- SALES-PD-A FUSION PRO ELECTRIC DIRECT DRIVE ANGLE RISER
- SALES-PD-A--V FUSION PRO ELECTRIC DIRECT DRIVE ANGLE RISER WITH VFD
- SALES-PD-C FUSION PRO ELECTRIC DIRECT DRIVE CLAMP
- SALES-PD-C--V FUSION PRO ELECTRIC DIRECT DRIVE CLAMP WITH VFD
- SALES-PD-F FUSION PRO ELECTRIC DIRECT DRIVE CLOSED TANK
- SALES-PD-F--V FUSION PRO ELECTRIC DIRECT DRIVE CLOSED TANK WITH VFD
- SALES-PD-P FUSION PRO ELECTRIC DIRECT DRIVE PLATE
- SALES-PD-P--V FUSION PRO ELECTRIC DIRECT DRIVE PLATE WITH VFD
- SALES-PD-U FUSION PRO ELECTRIC DIRECT DRIVE CUP PLATE
- SALES-PD-U--V FUSION PRO ELECTRIC DIRECT DRIVE CUP PLATE WITH VFD
- SALES-PDA-A FUSION PRO AIR DIRECT DRIVE ANGLE RISER
- SALES-PDA-C FUSION PRO AIR DIRECT DRIVE CLAMP
- SALES-PDA-F FUSION PRO AIR DIRECT DRIVE CLOSED TANK
- SALES-PDA-P FUSION PRO AIR DIRECT DRIVE PLATE
- SALES-PDA-U FUSION PRO AIR DIRECT DRIVE CUP PLATE
- SALES-PG-A FUSION PRO ELECTRIC GEAR DRIVE ANGLE RISERS
- SALES-PG-A--V FUSION PRO ELECTRIC GEAR DRIVE ANGLE RISERS WITH VFD
- SALES-PG-C- FUSION PRO ELECTRIC GEAR DRIVE CLAMP
- SALES-PG-C--V FUSION PRO ELECTRIC GEAR DRIVE CLAMP WITH VFD
- SALES-PG-F FUSION PRO ELECTRIC GEAR DRIVE CLOSED TANK
- SALES-PG-F--V FUSION PRO ELECTRIC GEAR DRIVE CLOSED TANK WITH VFD
- SALES-PG-P FUSION PRO ELECTRIC GEAR DRIVE PLATE
- SALES-PG-P--V FUSION PRO ELECTRIC GEAR DRIVE PLATE WITH VFD
- SALES-PG-U FUSION PRO ELECTRIC GEAR DRIVE CUP
- SALES-PG-U--V FUSION PRO ELECTRIC GEAR DRIVE CUP WITH VFD
- SALES-PGA-A FUSION PRO AIR GEAR DRIVE ANGLE RISERS
- SALES-PGA-C FUSION PRO AIR GEAR DRIVE CLAMP
- SALES-PGA-F FUSION PRO AIR GEAR DRIVE CLOSED TANK
- SALES-PGA-P FUSION PRO AIR GEAR DRIVE PLATE
- SALES-PGA-U FUSION PRO AIR GEAR DRIVE CUP
Manuals
- FM-1001 Safety REV A
- FM-1002 Unpack/Insp REV A
- FM-1003 Storage REV A
- FM-1004 Pro & Flow Open Install REV B
- FM-1005 BDRA Mech Seal Install REV B
- FM-1006 Pro Closed Install REV C
- FM-1007 Sanitary Threaded Install REV B
- FM-1008 Clamp & Cup Mnt Install REV A
- FM-1010 Shaft Install - Hollow Arbor REV A
- FM-1011 Shaft Install - Shaft Rigid Coupling Install REV A
- FM-1013 Mounting Guidelines REV B
- FM-1014 Impeller Installation REV B
- FM-1015 Appendix A -Pro Supporting Drawings REV A
- FM-1016 Bearing Housing Maintenance REV A
- FM-1017 Pro GB Lube REV A
- FM-1018 Warranty and Contact REV A
- FM-1019 Appendix B - Pro Component Manual Excerpts REV A
- FM-1020 Plate Mount Installation REV B
- FM-1021 Electrical Installation REV A
- FM-1022 Plate with Angle Risers Installation REV A
- FM-1023 Stuffing Box Installation REV A
- FM-1024 SDRA & SDRG Seal Install REV A
- FM-1025 Lip Seal Installation REV A
- FM-1026 Nylon Coupling Installation REV B
- FM-1027 DDRA Seal Install & Plumbing REV A
- FM-1028 Air Motor Installation & Plumbing REV A
- FM-1034 Flexible - Jaw Type Coupling Installation REV A
- Open Tank
- Closed Tank
- Fusion Pro Mounting Guide - BAFFLES
Quick Start Guides
- QSG-108 All VFD Instructions REV A
- QSG-109 All Electric Motor Instructions REV A
- QSG-110 All Air Motor Instructions REV A
- QSG-111 Pro Hollow Bore Shaft Installation REV A
- QSG-112 All Rigid Coupling Shaft Installation REV A
- QSG-113 All Bolted Removeable Rigid Coupling Shaft Installation REV B
- QSG-114 All Sanitary Coupling Shaft Installation REV A
- QSG-115 All Set Screw Impeller Installation REV A
- QSG-116 Pro Angle Riser Mount Installation (A) REV A
- QSG-117 Pro Clamp Mount Installation (C) REV A
- QSG-118 All Top Entry Flange Mount Instructions (F) REV A
- QSG-119 Pro Plate Mount Installation (P) REV A
- QSG-120 Pro Cup Mount Installation (U) REV A
- QSG-121 All BDRA Seal Installation REV A
- QSG-122 All SDRG Seal Installation REV A
- QSG-123 All FDA Lip Seal Instructions REV A
- QSG-124 All Viton Lip Seal Instructions REV A
- QSG-138 All Top Entry DDRA & DWRA Seal Instructions REV A
- QSG-140 All Impeller Hub w Key Installation REV B
- QSG-146 Top Entry Stuffing Box Seal Instructions REV A